Q-Lex Synthetic Enamel
Q-LEX Synthetic Enamel is an oil modified alkyd-based enamel paint, specially formulated for interior and exterior metal, wood and wall surfaces giving them a touch of brilliance and breathing colorful life into your home. This matt finish paint will provide lasting beauty even in harsh weather and help to prevent fungus growth.
Light Fast
With high efficiency German Origin dyes and pigments, the color tones last for long period of
Super Sand
Superior Based Alkyd Based resin is the popular and modern option for the enamel paints. It is water resistance and can resist normal extremes of temperature.
Covering
Best covering capacity under normal conditions with its bright crystal titanium. Ready to technical data sheet for application and thinning procedure.
Light Fast
With high efficiency German Origin dyes and
pigments, the color tones last for long period of
Super Sand
Superior Based Alkyd Based resin is the popular
and modern option for the enamel paints. It is
water resistance and can resist normal extremes
of temperature.
Covering
Best covering capacity under normal conditions
with its bright crystal titanium. Ready to technical data sheet for application and thinning procedure.
HOW TO USE
- Stir well before use.
- Application can be done by brush, roller or spray.
- Thin (by volume) up to 10-15% with White Spirit or Mineral Turp or conventional air spray.
- Clean up all equipment with White Spirit or Mineral Turpentine immediately.
SURFACE PREPARATION
New Surfaces Masonry Surfaces must be dry and free from dirt, grease and other
contaminants. Smoothen the surface with sandpaper. Clean off and dry.
Metal
Surface must be dry and free from dirt, grease and other contaminants. Ferrous
substrate should be sanded or wire-brushed to remove millscales and rust. Clean off
and dry.
Previously Painted Surfaces
Walls, Wood & Metal
f Any loose flaking paint film must be scraped off. Defective areas should be sanded
and smoothened. For ferrous substrates, rust should be removed thoroughly. The
entire surface must finally be dry and free from dirt, grease and other contaminants.
The scraped areas should be spot-primed prior to painting.
